Product Description
FEATURES:
THICK AND HIGH QUALITY – have excellent thermal insulation effect, with anti-scratch layer on the surface, friction resisting,
won’t fade nor blister.
HEAT INSULATION AND ENERGY SAVING – blocking out 85% of infrared rays, retain heat in winter and keep it out in summer,
energy saving. 10% of VLT meaning practical reduce Light.
EFFECTIVE UV REJECTION – blocks out 97% of UV rays, prevent and reduces fading and aging of interior furnishings.
PRIVACY PROTECTION – great intend privacy during daytime; the privacy-effect is reversed at night since the interior will be
exposed to more light than the exterior.
STATIC CLING AND NON-ADHESIVES – glue-free design, no chemical release.
EASY TO INSTALL – make sure window surface is completely clean and absolutely free of any blemishes, remember to use a lot of
soap/water mixture to soak both the adhesive side and window.
SPECIFICATION:
Film Type: One Way Mirror
Material: PET
Color: Sliver
Visible Light Transmission: 15%
Infrared cut: 88%
Visible Light Reflectance: 8%
Thickness of Base Film: 2.0MIL=0.15mm
Size:
50cm*200cm/19.68×78.74 inch （W x L）=10.8 sqft
60cm*200cm/23.62×78.74 inch （W x L）=12.9 sqft
90cm*200cm/35.43×78.74 inch （W x L）=19.3 sqft
Installation Steps:
Step 1. Measure the window and cut the film into the right size.
Step 2. Clean and wet the glass with a lot of soapy water.
Step 3. Make sure to remove the backing protective sheet
Step 4. Put the film on the glass and slide to align
Step 5. Squeegee away air bubbles and excess water with a scraper or hard card.
Enjoy!
Tip 1: Only applies on the flat, clean, smooth glass surface. Make sure no glue, dust, or residue on the glass, especially window conners.
Tip 2: Trim away the edges. Leaving a gap of 1/2 inches between the film and window frame. Do not connect to the window frame.
Note: Always only reflects the bright side. Remember to draw a curtain during night.
PACKAGE INCLUDES:
1x Heat Insulation Privacy Film
or 1M nano Tape
The United Kingdom sets minimum light level requirements for window tint.
Please make sure you follow these requirements: https://www.gov.uk/tinted-vehicle-window-rules
